詳細內容：產品基本信息： 型號：UNISILKON TK M 1012 英文名稱:KLUBER UNISILKON TK M 1012 粘度等級：NLGI 品牌/產地：克魯勃，德國 包裝規格及價格：1KG/1350 25KG/20000 類型：滑動和密封高溫潤滑劑 寶貝描述： UNISILKON TK M 1011; TK M 1012滑動和密封高溫潤滑劑 說明：UNISILKON TK M1011和UNISILKON TK M1012是潤滑，滑動和密封劑根據硅油。他們提供高熱穩定性，是不溶于水和耐多種環境介質。UNISILKON TK M1011已經測試和認可，符合DINEN377 E類，DIN - DVGW Reg.-No.吳5162AR0761。 應用：UNISILKON TK M1011用作潤滑，滑動和密封劑對燃氣燃燒裝置的所有類型包括其附件哪一部分在接觸與燃料氣體，如閥門，錐度旋塞閥，球閥在炊具和加熱器與服務溫度ACC。以EN為0 °C至160°C，并與燃料氣體中天然氣等氣體混合物和煤氣，丙烷，丁烷ACC。到DVGW工作表G260。潤滑油的密封元件，以提高容量和降低滑動例如磨損在塑料水龍頭。壓入和安裝的O形圈的援助，填料如滑動和密封膏對在實驗室磨玻璃水龍頭化學工業絕緣劑高介電擊穿強度變電站和開關站防止電弧。 包裝規格：1千克25千克 德語： UNISILKON TK M 1011; TK M 1012 High-temperature lubricating, sliding and sealing agent Description UNISILKON TK M 1011 and UNISILKON TK M 1012 are lubricating, sliding and sealing agents based on silicone oil. They offer high thermal stability, are insoluble in water and resistant to many ambient media. UNISILKON TK M 1011 has been tested and approved according to DIN EN 377 class E, DIN-DVGW reg.-No. NG 5162AR0761. Application UNISILKON TK M 1011 is used as lubricating, sliding and sealing agent for all types of gas burning installations including their accessory parts which are in contact with fuel gas, e.g. valves, taper plug valves, ball valves in cookers and heaters with a service temperature acc. to EN 377 of 0°C to 160°C and in context with fuel gases and gas mixtures such as natural gas and town gas, propane, butane acc. to DVGW worksheet G260. Lubricant for sealing elements, to increase sliding capacity and reduce abrasion e.g. in plastics taps. Press-in and mounting aid for O-rings, packings Sliding and sealing paste e.g. for ground-glass and taps in laboratories of the chemical industry Insulating agent High dielectric breakdown strength in substations and switching stations to prevent arcing. Application notes Clean and degrease surfaces. Apply a thin layer to the entire surface by means of brush, spatula or cloth which does not fray. Minimum shelf life The minimum shelf life of UNISILKON TK M 1011 is approx. 24 months if the product is stored in its unopened original container in a dry place. The minimum shelf life of UNISILKON TK M 1012 is approx. 12 months if the product is stored in its unopened original container in a dry place. Pack sizes UNISILKON TK M 1012: 1 x 1 kg PE can UNISILKON TK M 1011: 1 x 50g PE tube 1 x 1kg PE can 1 x 25kg bucket with inliner UNISILKON TK M 1011 UNISILKON TK M 1012 High thermal stability Good resistance to low temperatures Resistant to ambient media Good water resistance UNISILKON TK M 1011 approved acc. to DIN EN 377 class E Neutral towards EN 377 elastomers, e.g. SRE – NBR 1